Contents - Index - FanMechanics Home Page

Enter Duty Requirements

Enter duty values into the Duty Requirements form.

For example:

Enter 15 m3/s, 2 KPA on the discharge and 1 KPA on the inlet.

Note that the selection pressure shows a figure of 3 KPA because the inlet pressure is checked as being negative.

Screen Shot

Actual Volume

Normal Volume

Mass Flow

Gauge & Absolute Pressures

Selection Temperature

Max Inlet Temperature

Cold start Temperature

Relative Humidity

Specific Gravity

Elevation

Density

Manual Design and Plot

Click the 'New Selection' button at the bottom right of the form to proceed with the duty entered.